SETTINGS ON THE SET UP MENU

Once the following settings have been completed, the unit can always be operated under the same conditions. The settings will be retained in the memory until they are changed, even if the power is turned off.

Common procedures of settings

1. Press the SET UP button in the stop mode. “SET UP MENU” appears on the TV screen.

Language Display Speaker Parental

2.Press the 4, a, 5 or b button, then press the ENTER button to select the menu. Please refer to the on-screen instructions.

3.Press the SET UP button to quit this menu.

Example:

Language
OSD:
ENGLISH
AUDIO:
DISC, ENGLISH, SPANISH, FRENCH, OTHERS
SUBTITLE:

DISC, ENGLISH, SPANISH, FRENCH, OTHERS

DVD MENU:

DISC, ENGLISH, SPANISH, FRENCH, OTHERS

 

(DISC: The first priority language recorded on the disc is

 

used.)

Note:

-You cannot switch audio sound track languages if there is only one language recorded on the disc.

-When you play a DVD disc, the player automatically displays the pre- selected subtitle language if it is included on the disc.

-If “OTHERS” is selected, enter the language code. (See “LANGUAGE CODE LIST” on Page 22.)

Display
TV TYPE:
4:3 LB, 4:3 PS, 16:9
COMPONENT OUTPUT*:
INTERLACE, PROGRESSIVE
PROGRESSIVE MODE*:
AUTO, VIDEO, FILM
*: For U.S.A., Canada and Korean models only

TV TYPE:

Select the appropriate setting for your TV screen size.

COMPONENT OUTPUT (U.S.A., Canada and Korean models only):

If you use a conventional TV and connect it to the COMPONENT VIDEO OUT jacks (see page 10), select “INTERLACE”.

If you use a TV with progressive-scan capability and connect it to the COMPONENT VIDEO OUT jacks (see page 11), select “PROGRESSIVE”. Note:

- If the VIDEO OUT SELECT and VIDEO OUT SCAN SELECT switches
are not correct position, you cannot select “COMPONENT OUTPUT:
PROGRESSIVE”.
- If you select “COMPONENT OUTPUT: PROGRESSIVE” when using

a conventional TV, the TV screen is disturbed. In this case, turn off the

power, and then set the VIDEO OUT SCAN switch to the INTERLACE
4:3 LB (Letterbox):
Select when a conventional TV set is connected.

When the wide screen disc is played back, the black bands appear at the top and bottom of screen.

4:3 PS (Panscan):

Select when a conventional TV set is connected.

When the wide screen disc is played back, it displays pictures cropped to fill to your TV screen. The left and right edges are cut off.

16:9:
Select when a wide screen TV set is connected.

Played in “FULL” size. (Setting the wide screen TV to “FULL” mode is also necessary.)

Note:

Cut off

position.

PROGRESSIVE MODE (U.S.A., Canada and Korean models only):

When “COMPONENT OUTPUT: PROGRESSIVE” is selected as above, select “AUTO”, “VIDEO” or “FILM”.

AUTO:

It automatically selects the VIDEO (Video source) or FILM (Film source) according to the played disc. Normally, select this mode.

VIDEO (Video source):

Major DVD-Video sources consist of video sources and film sources. Select when playing a DVD video disc recorded with a video source or TV program like drama, animation, etc. (30 frames per second, 60 fields).

FILM (Film source):

Major DVD-Video sources consist of video sources and film sources. Select when playing a DVD video disc recorded with a movie film (24 frames per second).

Note:

-The screen size may differ depending on the DVD video discs.

-If you select 16:9 to get rid of the black bands on screen when wide screen disc is played back, picture may be slightly distorted.

-In some discs, even if 4:3 PS is selected, the black bands may remain on the screen.

-Initial setting is “AUTO”.
-If picture flickering occurs at “AUTO” mode, select “VIDEO” or “FILM”.

E-16