Picture zoom [DVD] [Video CD]

1.Press the SHIFT + 4 ZOOM buttons during play. The central part of the picture is magnified.

-Each time you press the SHIFT + 4 ZOOM buttons or press the RETURN button, the picture zooms in or out (“Zoom +15” – “Zoom

–15”).

-Each time you press the 4, a, 5 or b button, the picture moves from side to side, up and down.

2.To return to normal play, press the CANCEL button.

Note:

Picture zoom operation may not work with some discs.

Viewing from a desired camera angle (Multi-Angle) [DVD]

Some DVD discs may contain scenes which have been shot simultaneously from a number of different camera angles. The jacket or case of a disc that are recorded with multi-angle scenes will be marked.

Example:

3

Note: The recorded angles differ depending on the disc used.1.Play the disc that is recorded with multi-angle scenes.2.Press the SHIFT + 2 ANGLE buttons repeatedly until the desired angle appears.

Example:

2

Angle replay [DVD]

During playing a Multi-angle scene, press the SHIFT + 3 REPLAY buttons. The player skips back to last approximately 10 seconds, then changes it to the next camera angle and plays it, and continues play. (If desired, press both buttons again.)

Repeat play

Press the REPEAT button during play (or programmed play) of the title (or track) you want to repeat. Each time the button is pressed, the repeat mode changes as follows.

[DVD]

Title (1 REP.): Repeat of the title being played Off: Normal play mode

[Video CD] [CD]

1 (1 REP.): Repeat of the track being played All (ALL REP.): Repeat all tracks

Off: Normal play mode

Note:

-Repeat play mode may not work correctly with some discs.

-Repeat play does not work during menu play of a Video CD with playback control.

Programmed play [Video CD] [CD]

Up to 32 selections can be programmed.

Programming procedure

1.Press the PROGRAM button in the stop mode. “PROGRAM” screen appears. “PROG.” flashes and “Pr 1” appears on the display.

2.Press the number button(s) to select the track number. Example:To select track No. 3, press 3.

To select track No.10, press 1, then 0. To select track No.24, press 2, then 4. Note:

-If you made a mistake, press the CANCEL button.

-Do not use the ≥10 button.

-Press the PROGRAM button to quit this menu.

3.Press the ENTER button. The highlighted box automatically moves to the next program number.

Example:

PROGRAM

 

 

#

Track

Track Time

1

0

2

00 : 04 : 57

_ _

_ _

_ _

_ _

_ _

_ _

_ _

00 : 04 : 57Total programmed time4.Repeat step 2–3 above to select another track.5.Press the button to start play. “PROG.” remains lit.When all programmed selections have played, the player stops automatically.- The program contents are retained in memory.

To clear the program one by one

In the programming mode, press the 4or 5button to select the programnumber. Then press the CANCEL button.

To clear all the programs

In the programming mode, press the n button.

To change the program

1.In the programming mode, press the 4 or 5 button to select the program number.

2.Press the number button(s) to select the track number to be replaced, then press the ENTER button.

To use the program again with the same contents

Press the PROGRAM button to call up the “PROGRAM” screen, thenpress the button.

E-19