DISC PLAY
Important note:
-This “DISC PLAY” explains the basic instruction of the DVD player section using the remote control unit.
-Some DVD or Video CD discs have different functions that may not be explained in this instruction manual. You may need extra instructions. In this case, please follow the instructions displayed on the TV screen or the jacket or case of the disc.
-“ 
” may appear on the TV screen during operation. This icon means that the function is not available on the current disc.
Preparations
-Press the STANDBY/ON button to turn on this unit.-Turn on the TV and select the channel for the DVD player.Select the playback picture size suitable for the aspect ratio of the TV. (See “Display” under “SETTINGS ON THE SET UP MENU” on Page 16.)
-Select the desired language for the screen menus. (See “OSD” – “Language” under “SETTINGS ON THE SET UP MENU” on Page 16.)
Note:
-Do not touch the disc tray while it is moving.-Never place anything except a disc on the disc tray. Foreign objects can damage the unit.
-Do not apply excessive force to the disc tray.-Only one disc can be placed on the disc tray.-To open or close the disc tray, be sure to use the qbutton. Do not press the disc tray with your hand.
When an operation button is pressed, that operation is displayed on the TV screen. The display turns off after several seconds.
If a disc is loaded, you can turn the unit on and begin play immediately| by pressing the | button. |
Loading a disc
1.Press the qbutton. “OPEN” appears on the display and the disc tray opens.2.Place the disc with the label facing up on the disc tray.12 cm disc | 8 cm disc |
3.Press the q button again to close the disc tray. - Some discs may start play automatically.
Starting play
Press the | button. The DVD function is selected and play starts |
| automatically. |
|
Example: |
|
| C |
Note:
-If “NO DISC” appears on the display, load the disc.If the disc is loaded with the label side downward (and it is a single sided disc), or if a badly scratched disc is loaded, “NO DISC” (or “NO PLAY”) appears. If this occurs, load the disc correctly or replace the disc.
-The producing method of commercially available discs may differ with each disc. Though there may be a case that the sound becomes intermittent just after the playback of a disc starts, this is dependent on the disc and not a malfunction of this system.
If a menu appears on the TV screen...
Press the 4, a, 5 or b button (or the number buttons), then press the ENTER button to select
| the desired menu. Playback of the selected menu | ENTER | |
| ||
| will start. |
| |
Note: | Remote control | |
| For more details, please refer to the jacket or | ||
| ||
| case of the disc. |
|
Stopping play
-Press the n button once.When you press the button, play starts automatically from thepoint where you stopped. Note:Some discs may not resume play.-Press the n button twice. The player stops completely.| When you press the | button, play starts from the beginning of the |
| disc. |
|
Continuing play from where you stopped watching (LAST
MEMORY PLAY) [DVD]
1.During play, press the LAST MEMO button at the point from which you want to resume play later.
| 3. Load the disc (and press the | button), or turn on the power. “Last |
| Memory Play?” screen appears. |
|
No
Clear … The memory is released.4.Press the 4 or 5 button to select “Yes”.5.Press the ENTER button. Play resumes from the point where youstopped. (If desired, press the LAST MEMO button again.) Note:-Points on up to 5 discs can be memorized.-The Last Memory Play mode may not work correctly with some discs.What is “PBC”?
“PBC” is an abbreviation for “Playback Control” that refers to control codes prerecorded on Video CDs.
During playback of a Video CD with PBC, “PBC” appears on the display.To lock the disc tray (Using the main unit)
You can lock the disc tray to prevent misuse of young children. While the disc tray is opened, press the q button until “LOCKED” appears on the TV screen.
-The q button will not function.To release this mode, press the qbutton until “UNLOCKED” appears.