Installing batteries in the remote control

Insert the batteries in the correct direction by aligning the + and – marks on the batteries with the polarity markings (+ and –) inside the battery compartment.

1Press the tab.

3

2

1.Press the tab on the battery compartment cover in the direction of the arrow and remove the cover.

2.Insert the two batteries (AA, R06, UM-3 type) with + and – oriented properly.

3.Attach the cover so that it snaps into place.

Notes on batteries

•Change all of the batteries if you notice a decrease in the operating range of the remote control.

•Do not use old batteries together with new ones.

•Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color.

•If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.

Using the remote control

Approximately 6 m (20 feet)

30 30

Handling the remote control

•Do not spill water or other liquids on the remote control.

•Do not drop the remote control.

•Do not leave or store the remote control in the following types of conditions:

–high humidity or temperature such as near a heater, stove or bath;

–dusty places; or

–in places subject to extremely low temperatures.

E-5