E

EMU01294

Throttle Friction Adjusting Knob

A friction device in the tiller handle provides resistance to movement of the throttle grip. This is adjustable for operator preference.

Resistance

Knob

Increase

Turn clockwise

502016

Turn counterclockwise

Decrease

When constant speed is desired, tighten the adjusting knob to maintain the desired throttle setting.

w

Do not overtighten the friction adjusting knob. If there is too much resistance, it may be difficult to move the throttle grip, which could result in an accident.

EMC27110*

Engine stop button

Pushing this button opens the ignition circuit and stops the engine.

506021

EMC28210

Engine stop lanyard switch

The lock-plate on the end of the lanyard must be attached to the engine stop switch for the engine to run. The lanyard should be attached to a secure place on the operator’s clothing, or arm or leg. Should the operator fall overboard or leave the helm, the lanyard will pull out the lock plate, stopping ignition to the engine. This will prevent the boat from running away under power.

2-5