
E
902054
604011
224012*
EML22110
Cleaning the Fuel Filter
1)Remove the screws holding the fuel hose joint assembly . Pull the assem- bly out of the tank.
2)Clean the filter (located on the end of the suction pipe) in a suitable clean- ing solvent. Allow the filter to dry.
3)Replace the gasket with a new one. Reinstall the fuel hose joint assembly and tighten the screws firmly.
EMU14622
INSPECTING AND REPLACING ANODE(S)Yamaha outboard motors are protected from corrosion by sacrificial anodes. Inspect the external anodes periodically. Remove scales from the surfaces of the anodes. Consult a Yamaha dealer for replacement of external anodes.
cC
Do not paint anodes, as this would render them ineffective.
NOTE:
Inspect ground leads attached to external anodes on equipped models. Consult a Yamaha dealer for inspection and replacement of internal anodes attached to the power unit.
000606