E

q

w

605024

6)Remove the motor from the water tank.

7)Install the silencer cover and top cowling.

1Water surface

2Lowest water level

EMK26011

Lubrication

1)Remove the spark plug(s). Spray a Yamaha “Stor-Rite Engine Fogging Oil” into each cylinder for 10 seconds. Grease the spark plug threads and reinstall the spark plug(s) and torque to proper specification. (Refer to the

“CLEANING AND ADJUSTING SPARK PLUG”).

2)Turn the engine over with the stop lanyard disconnected to work the fog- ging oil into the piston rings.

3)Change the gear-case oil. (Refer to “CHANGING GEAR OIL”). Inspect the oil for the presence of water which indicates a leaky seal. Seal replace- ment should be performed by an authorized Yamaha dealership prior to use.

4)Grease all grease fittings. (Refer to the “GREASING”)

EMK27011

Cleaning and Anti-corrosion Measure

1)Wash down the exterior of the out- board with fresh water and dry off completely.

2)Spray the engine’s exterior with “Yamaha Silicone Protectant” (Part No. LUB-SILCNE-13-00).

3)Wax the cowling with a non-abrasive wax such as “Yamaha Silicone Wax” (Part No. ACC-11000-15-02).

4-7