E
EJU01785
Quick Shift Trim System (QSTS) selector
The QSTS selector 1 is located at the left handlebar grip and is used to adjust the trim angle of the watercraft.
Operating the QSTS selector changes the angle of the jet thrust nozzle vertically. This changes the trim angle of the watercraft.
There are 5 positions: 2 bow down positions A and B, neutral “N,” and 2 bow up positions C and D.
To change the trim angle:1.Reduce engine speed to 4,000 r/min or less.
2.Squeeze the shift lock lever 2, and then turn the QSTS selector to the desired position.
3.Release the shift lock lever to lock the QSTS selector.
CAUTION:
Do not turn the QSTS selector while operating the watercraft at full throttle, otherwise damage could occur to the QSTS.
The neutral “N” position will provide good performance for most operating conditions.
To enhance particular types of perfor- mance, select bow down or bow up.