E

EJU18351

Switches

CAUTION:

Do not run the engine for more than 15 seconds on land without supplying water. The engine can overheat.

Check the start switch, the engine stop switch, and the engine shut-off switch for proper operation.

Push the start switch 1 to start the engine. As soon as the engine starts run- ning, push the engine stop switch 2 to verify that the engine stops immediately. Restart the engine, and then pull the engine shut-off cord 5 to remove the clip 4 from the engine shut-off switch 3 to verify that the engine stops immediately. (See pages 2-7 to 2-9 for information on proper operation of the start switch, the engine stop switch, and the engine shut-off switch.)

EJU01806

Cooling water pilot outlet

Check that water comes out from the port (left) pilot water outlet while the engine is running and the watercraft is in the water. (See page 2-9 for further instructions.)

EJU01246

Multifunction meter

Check the operation of the multifunction meter. (See pages 2-15 to 2-19 for operation of the meter.)

3-18