E
To remove water from the bilge:
1.Remove the stern drain plugs.
2.Raise the bow of the watercraft until the water drains.
3.After the water has drained, wipe the bilge with dry rags to make sure that the bilge is thoroughly dry.
4.Install the drain plugs.
EJU20581
Stern drain plug
Check the stern drain plugs for proper installation.
CAUTION:
●Make sure that the stern drain plugs are tightened securely before launch- ing the watercraft. Otherwise, water may flood the engine compartment and cause the watercraft to submerge.
●Clean any foreign materials, such as dirt or sand, from the drain plug threads before installing the drain plugs. Otherwise, the drain plugs may be damaged and water may enter the engine compartment.