E
NOTE:
The condition of the battery can be known by checking the specific gravity of the elec- trolyte. However, you can also know the condition of the battery by measuring the voltage at both battery terminals. Charge the battery if the voltage is less than 12 volts.
Specific gravity (for reference): 1.28 at 20 °C (68 °F)
It is recommended to have a Yamaha dealer check the specific gravity and to charge the battery. If you maintain the battery yourself, be sure to read and follow the instructions provided with the battery tester and charger you use.
EJU01169
Cleaning the watercraft
Clean the watercraft before storing it for a long period.
1.Wash down the hull, handlebars, and drive unit with fresh water.
2.Rinse the engine and bilge area with fresh water. Drain off all water and wipe up remaining moisture with clean, dry rags.
3.Spray the engine’s exterior with Yamaha Silicone Protectant and Lubricant.
4.Wax the hull with a
5.Wipe all vinyl and rubber components, such as the seat and engine compart- ment seals, with a vinyl protectant such as Yamaha Protectant.