Features and functions

●Lock mode of the Yamaha Security System has been selected. (See page 40 for Yamaha Security System lock and unlock mode selection procedures.)

●Clip is removed from the engine shut-off switch.

●Throttle lever is squeezed.

EJU36700

Right handlebar switches

1

2

3

4

1Up switch

2Down switch

3“SET” switch

4“NO-WAKE MODE” switch

EJU36710

“SET” switch

Push this switch to activate the cruise assist. (See page 42 for more information.)

EJU36720

Up and down switches

Push these switches to increase or decrease the engine speed while the cruise assist is op- erating. (See page 42 for more information.)

EJU36730

“NO-WAKE MODE” switch

Push this switch to activate or deactivate the no-wake mode. (See page 41 for more infor- mation.)

EJU31210

Throttle lever

Squeeze the throttle lever to increase engine speed.

1

1Throttle lever

Release the throttle lever to decrease engine speed or to return it to the idle position.

EJU36740

Cooling water pilot outlets

This watercraft is equipped with cooling water pilot outlets on the port (left) and starboard (right) sides of the watercraft.

When the engine is running, cooling water is circulated in the engine, and then it is discharged from the pilot outlets.

To check for proper operation of the cooling system, check that water is being discharged from the port (left) pilot outlets. If water is not being discharged from these outlets, cooling water may not be circulating in the engine. When this occurs, stop the engine and check

34