Operation

(5)Flush the cooling system to prevent it from clogging with salt, sand, or dirt. (See page 83 for flushing procedures.)

(6)Rinse the engine and engine compart- ment with a small amount of water.

NOTICE: Do not use high-pressure water when rinsing the engine or en- gine compartment as severe engine damage could result. [ECJ00571]

(7)Wipe the engine and engine compart- ment dry with a clean cloth (repeat step 3, if necessary).

(8)Wipe the hull, handlebars, and jet unit dry with a clean cloth.

(9)Spray a rust inhibitor, such as Yamaha Silicone Protectant and Lubricant, on me- tallic parts to minimize corrosion.

(10)Allow the engine compartment to air dry completely before installing the seats.

EJU33462

Transporting

Before putting the watercraft on a trailer or transporting it, be sure to put the shift lever in the forward position. When transporting the watercraft on a trailer, secure the tie downs to the trailer through the bow eye and stern eyes. NOTICE: Do not attach ropes or tie downs to any part of the watercraft other than the bow eye and stern eyes to secure the watercraft to the trailer. Otherwise, the watercraft may be damaged. Wrap the ropes or tie downs with towels or rags where they touch the body of the water- craft to avoid scratches or damage. Do not transport the watercraft with the shift lever in the reverse position. Otherwise, the reverse gate may hit an obstacle, which could cause damage. [ECJ00642]

82