Features and functions
check engine warning indicator begin to blink, and the buzzer sounds intermittently.
If this occurs, reduce the engine speed, return to shore, and have a Yamaha dealer check the engine.
TIP:
Press any button on the multifunction information center to stop the buzzer.
EJU35034
Right multifunction display and operation buttons (for FX Cruiser SHO)
The right multifunction display shows the following information.
●Compass
●Average speed
●Tripmeter
●Trip timer
●Fuel consumption per hour
●Fuel consumption per kilometer/mile
●Water temperature
●Air temperature
The following operation buttons are on the right side of the multifunction information cen- ter.
1“Mode/Reset” button
2“Start/Stop” button
To switch the display mode, push the “Mode/Reset” button for less than 1 second. The display mode changes in the following or- der.
Compass → Average speed → Tripmeter → Trip timer → Fuel consumption per hour → Fuel consumption per kilometer/mile → Water temperature → Air temperature
To switch the display units between kilome- ters/liters/degrees Celsius and miles/gal-
lons/degrees Fahrenheit, push the “Volt/Hour” button for at least 1 second, within 10 seconds after the multifunction information center starts operating.
The “SPEED” indicator light blinks three times if miles/gallons/degrees Fahrenheit are selected as the display units when the multifunc- tion information center starts operating, or if
51