Features and functions
Activating and deactivating the cruise assist
Activation of the cruise assist will be confirmed by the beeper and the digital speedometer display.
Number | Cruise assist opera- | Digital | |
speedome- | |||
of beeps | tion | ||
ter display | |||
|
| ||
|
|
| |
| Activated | Starts | |
| flashing | ||
|
| ||
|
|
| |
| Deactivated | Stops | |
| flashing | ||
|
| ||
|
|
| |
| Engine speed in- | Continues | |
| creases or decreases | flashing | |
|
|
|
TIP:
The beeps and the flashing digital speedometer display also indicate the activation of the
To activate the cruise assist:
TIP:
●The cruise assist can only be set between engine speeds of approximately 3000 r/min and approximately 7000 r/min.
●The cruise assist cannot be activated in the
eration mode information.)
(1)Operate the throttle lever until the desired engine speed is reached.
(2)Once the engine speed reaches the de- sired cruise assist setting, push the “SET” switch. When the cruise assist is activat- ed, the beeper sounds three times quick- ly and the digital speedometer display starts flashing. To keep the cruise assist activated, be sure to keep the throttle le- ver squeezed further than the position at which the cruise assist was set; releasing the throttle lever will deactivate the cruise assist.
TIP:
The digital speedometer display flashes continually while the cruise assist is activated. Make sure that the beeper has sounded and the digital speedometer display is flashing before squeezing the throttle lever to the full throttle position. If the speedometer display is not flashing, the cruise assist is not activated
43