Features and functions

There are 5 positions: 2 bow-down positions

(a)and (b), neutral “N”, and 2 bow-up posi- tions (c) and (d).

To enhance particular types of performance, select bow down or bow up.

To change the trim angle:

(1)Reduce engine speed to less than 3000 r/min.

(2)Squeeze the QSTS selector lock lever, and then turn the QSTS selector to the desired position. NOTICE: Do not turn the QSTS selector while operating the watercraft at an engine speed of 3000 r/min or more, otherwise damage could occur to the QSTS. [ECJ00012]

(3)Release the lock lever to lock the QSTS selector.

The neutral “N” position will provide good performance for most operating conditions.

EJU31330

Bow down

Turn the QSTS selector to (a) or (b) and the bow will go down while the watercraft is on plane.

Bow down puts more of the bow in the water. This gives the watercraft more “hook”, which enhances turning performance. This position will also help the watercraft get up on plane more quickly.

At higher speeds, however, the watercraft will have a greater tendency to “bow steer” and follow waves and wakes in the water. Fuel economy and maximum speed are also re- duced.

EJU31340

Bow up

Turn the QSTS selector to (c) or (d) and the bow will go up while the watercraft is on plane. Bow up puts less of the bow in the water. There is less water resistance, so straight-

37