Features and functions

To adjust the tilt, pull the tilt lever up, and then move the handlebars up or down to the desired position.

Make sure that the tilt lever returns to its original position and that the handlebars are locked in place after adjusting them.

EJU31301

Shift lever

The shift lever is located on the starboard (right) side of the watercraft and is used to control the reverse gate, which allows the wa- tercraft to move in reverse or forward.

EJU31312

Quick Shift Trim System (QSTS) selector

The QSTS selector is located at the left han- dlebar grip and is used to adjust the trim angle of the watercraft.

1

3 2

1Shift lever

2Forward position

3Reverse position

When the shift lever is in the reverse position, the watercraft can be launched from a trailer, or backed up out of tight spots where you cannot turn around easily.

1Quick Shift Trim System (QSTS) selector

2QSTS selector lock lever

Operating the QSTS selector changes the angle of the jet thrust nozzle vertically. This changes the trim angle of the watercraft.

36