Reverb 5
GranTouch—Owner’s Manual
ENGLISH
Reverb
The GranTouch features sophisticated reverberation effects, which enhance the digital piano
by adding natural ambience to the sound.
Setting the Amount of Reverb
The amount of reverb applied to the piano sound is determined by the REVERB control
on the Control Box. Turn the control clockwise to increase the reverb, counterclockwise to
decrease it. Reverb is off when the REVERB control is turned fully counterclockwise.
Setting the Type of Reverb
The GranTouch features three different reverb programs: Room, Hall 1, and Hall 2. You can
select the reverb programs by holding down certain keys while powering up.
1. To select a reverb program, hold down one of the keys shown in the fol-
lowing illustration while powering up the GranTouch.
Room: this reverb program simulates the reverb of a live room.
Hall 1: this reverb program simulates the reverb of a small concert hall.
Hall 2: this reverb program simulates the reverb of a large concert hall.
Tip: Hall 1 is the default reverb program. It is selected even if you don’t press any keys
during power up.
Note: You must hold the key down until a click is heard and then release it. Otherwise,
the desired reverb program may not be selected.
Note: When you power down the GranTouch, it does not remember which reverb pro-
gram you used. Next time you use the GranTouch, reselect the desired reverb program.
POWER
VOLUME HEADPHONES REVERB
ON
OFF
F (Room)
G (Hall 1) — default
A (Hall 2)
Middle C