8 Adjust the sound output levels of the center speaker and the rear speakers so that they become almost the same as that of the main speakers.
Press TIME/LEVEL once or more to select the speaker to be adjusted so that “CENTER”, “R SUR.”, “L SUR.” or “SWFR” appears on the display.
Remote control
*You cannot adjust the delay time while the test tone is sounding even if “DELAY” appears on the display after pressing TIME/LEVEL once or more.
Adjust the level.
*Pressing + raises and
*While adjusting, the test tone is fixed on the selected speaker.
Remote control
9 Press TEST again to stop the test tone.
Remote control
Notes
•Once you have completed these adjustments, you can only adjust the overall sound level of your audio system by using
VOLUME (or VOLUME ( ) on the remote control transmitter).
•If you use external power amplifiers, you may also use their volume controls to achieve the proper balance.
•If the function “CNTR” in the SET MENU mode is set to the NONE position, the sound output level of the center speaker cannot be adjusted in step 8. The center sound is automatically output from the left and right main speakers.
•If there is insufficient sound output from the center and rear speakers, you may decrease the main speaker output level by setting “M.LVL” to
English
27