PLAYING AN AUDIO/VIDEO SOURCE WITH THE DIGITAL SOUND FIELD PROCESSOR (DSP) EFFECT

2

1 Follow steps 1 to 7 shown in “BASIC OPERATIONS” on pages 28 to 29.

2 Select the desired DSP program that is suitable for the source. When using the remote control transmitter, press AMP<TUNER> on the component selector first.

Front panel

Remote control

or

2

3 If desired, adjust the delay time and the output level of

each speaker. (See pages 42 and 43 for details.)

Notes

•You can select a program for each of the program sources. Once you select a program, it is linked with the program source selected at that time. So, when you select the program source next time, the same program is automatically called.

•If you prefer to cancel the DSP function, press EFFECT. The sound will be that of normal 2-channel stereo without a surround sound effect.

•When a monaural sound source is played with DOLBY PRO LOGIC or DOLBY PRO LOGIC ENHANCED, no sound can be heard from the main speakers and the rear speakers.

Sound is heard only from the center speaker. However, if the NONE position is selected for “CNTR” in the SET MENU mode, the main speakers output the sound of the center channel.

The name of the selected program appears on the display.

40