4 For a DVD/LD or TV/DBS source, the current input mode is also shown.

*To change the input mode for the DVD/LD or TV/DBS source, press INPUT MODE (or the button that you have pressed to select the program source in step 3 on the remote control transmitter) once or more until the desired input mode (AUTO or ANALOG) is shown on the display. (See page 30 for details on switching the input mode.)

Front panel

Remote control

or

Input mode

5 Select the main speakers to be used.

Front panel

* If you use two main speaker systems, press both A and B.

6 Play the source. (See page 32 for detailed information on tuning.)

7 Adjust the volume to the desired output level.

Front panel

Remote control

or

8 If desired, adjust BASS, TREBLE, BALANCE, etc.

and use the digital sound field processor (see page 38).

BASS: Turn this control clockwise to increase (or counterclockwise to decrease) the low- frequency response.

TREBLE: Turn this control clockwise to increase (or counterclockwise to decrease) the high- frequency response.

BALANCE: Adjust the balance of the output volume from the left and right speakers to compensate for sound imbalance caused by the speaker location or listening room conditions.

Front panel

*These controls are only effective for the sound from the main speakers.

When you have finished using this unit

Press STANDBY/ON on the front panel again or POWER on the remote control transmitter to set this unit to the standby mode.

English

29