You can also make use of the automatic preset tuning function for FM stations only. This function enables the unit to perform automatic tuning and to sequentially store FM stations with strong signals. Up to 40 stations can be stored automatically in the same way as that for manual preset tuning on page 33. Note that a new setting can be stored in place of the former one.
3 1
2 4
English
To store stations
1 Select the FM band.
Front panel
2 Press TUNING MODE so that the “AUTO TUNING” indicator lights up on the display.
Front panel
Lights up
3 Press MEMORY and hold for about three seconds.
Front panel
Flashes
4 To tune in to higher frequencies, press the UP side of TUNING once.
To tune in to lower frequencies, press the DOWN side of TUNING once.
Front panel
*If TUNING is not pressed, the automatic preset tuning soon begins automatically toward higher frequencies.
Automatic preset tuning begins from the frequency currently displayed. Received stations are sequentially stored as A1, A2 ... A8.
*If more than 8 stations are received, they are stored as the preset station numbers in other groups (B, C, D and E) in that order.
If you want to store the first station received by automatic preset tuning as a desired preset station number
For example, if you want to store the first received station as C5, select “C5” while “A1”, the “MEMORY” indicator and the “AUTO TUNING” indicator flash after pressing MEMORY in step 3. Then press TUNING. The first received station is stored as C5, and the next stations as C6, C7 ... sequentially.
If stations have been stored up to E8, automatic preset tuning automatically stops.
The display shows the frequency of the last preset station. Check the contents and the number of preset stations by following the procedure in the section “To recall a preset station” on page 34.
35