Yamaha HTR-5140 TO RECORD A SOURCE ON TAPE OR MD

TO RECORD A SOURCE ON TAPE OR MD

4 1 2

2

1,4

English

1 Select the source to be recorded.

Front panel Remote control

or

2 Play the source and then turn up the volume to confirm the program source. (See page 32 for detailed information on tuning.)

Front panel Remote control

or

3 Begin recording on the tape deck, MD recorder or VCR connected to this unit.

4 When a tape deck or MD recorder is being used for recording, you can monitor the sounds being recorded by pressing TAPE/MD MON / EXT. DECODER on the front panel or TAPE/MD on the remote control transmitter so that the “TAPE/MD MON” indicator lights up on the display.

Front panel Remote control

or

Notes

•The settings of DSP and VOLUME, BASS, TREBLE and BALANCE have no effect on the material being recorded.

•A source that is connected to this unit only through the digital terminals cannot be recorded by a tape deck, MD recorder or VCR connected to this unit.

•Please check the copyright laws in your country to record from records, compact discs, radio, etc. Recording of copyright material may infringe copyright laws.

If you use a video source that has scrambled or encoded signals to prevent it from being dubbed, there may be a case that the picture itself will be affected by those signals.

31