C.DELAY [Adjusting the delay of center sounds (dialog, etc.)]

Control range: 0 ms to 5 ms (in 1 ms steps)

Preset value: 0 ms

*This adjustment is effective only when Dolby Digital is decoded and the signals of the selected source encoded with Dolby Digital contain center-channel signals.

This adjusts the delay between the main sound (on the main channels) and dialog, etc. (on the center channel).

The larger the value, the later the dialog, etc. is generated.

This is for making sounds from the left main, center and right main speakers reach your listening position at the same time. This is achieved by delaying the sound from the center speaker if the distance from the center speaker to your listening position is shorter than the distance from the left or right main speaker to your listening position.

Adjusting method

Adjustments should be made while watching the information on this unit’s display.

When adjusting with the remote control transmitter, press AMP<TUNER> on the component selector.

Press SET MENU once or more so that the function which you want to change appears on the display.

Front panel

Remote control

or

English

GUARD

Choices: ON/OFF

Preset position: OFF

If you wish to prevent accidental alterations to SET MENU and other adjustments on this unit, select ON. The following functions on this unit can be locked by this operation:

•Functions in the SET MENU mode

•Functions in the TIME/LEVEL mode

•Functions when using TEST

Press + or –to select any desired setting or to edit parameters of the function.

Front panel

Remote control

or

INPUT (Selecting the initial input mode of the sources connected to the TV/DBS input terminals)

Choices: AUTO/LAST

Preset position: AUTO

You can designate the input mode that is automatically selected when the power for this unit is switched on for only the sources connected to the TV/DBS input terminals of this unit.

AUTO: In this position, the AUTO input mode is always selected when the power for this unit is switched on.

LAST: In this position, the input mode you selected last time is memorized and will not be changed when the power is switched on again.

* See page 30 for details on switching the input mode.

Repeat these steps to change or adjust the settings of any other function.

Memory back-up

The memory back-up circuit prevents the stored data from being lost when this unit is set in the standby mode. If, however, the power plug is disconnected from the AC outlet or the power is cut due to temporary power failure for more than one week, the settings of the SET MENU mode will automatically return to the factory settings. If so, they can be re-set by simply following the procedure above.

45