Adjusting the delay time

Notes

 

 

You can adjust the time difference between the beginning of the

•

Adding too much delay will cause an unnatural effect with

sound from the main speakers and the beginning of the sound

 

some sources.

 

 

effect from the rear speakers.

•

When + or –is pressed, the sound is momentarily

The larger the value, the later the sound effect is generated.

 

interrupted.

 

 

This adjustment can be individually made to all programs.

 

 

 

 

 

 

 

 

 

 

 

Program

 

Control range (ms)

Preset value

 

 

 

 

 

 

 

 

 

1.

DOLBY PRO LOGIC

 

15 to 30

20

 

 

 

DOLBY DIGITAL

 

0 to 15

5

 

 

2.

DOLBY PRO LOGIC ENHANCED

 

15 to 30

20

 

 

 

DOLBY DIGITAL ENHANCED

 

0 to 15

5

 

 

3.

70 mm MOVIE THEATER

 

15 to 30

20

 

 

 

DIGITAL MOVIE THEATER

 

1 to 99

16

 

 

4.

MONO MOVIE

 

1 to 99

49

 

 

5.

TV SPORTS

 

1 to 99

9

 

 

6.

DISCO

 

1 to 99

40

 

 

7.

ROCK CONCERT

 

1 to 99

16

 

 

8.

CONCERT HALL

 

1 to 99

44

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

English

Adjusting the output level of the center, right rear and left rear speakers, and subwoofer

If desired, you can adjust the sound output level of each speaker even if the output level has already been set in “SPEAKER BALANCE ADJUSTMENT” on pages 25 to 27.

Notes

•The output level of the center speaker cannot be adjusted when the DISCO, ROCK CONCERT or CONCERT HALL program is selected, and the input signal is analog, PCM audio, or encoded with Dolby Digital in 2-channel format.

•If the function “CNTR” in the SET MENU mode is set to the NONE position, the sound output level of the center speaker cannot be adjusted. This is because, in this mode, the center sound is automatically output from the left and right main speakers.

•Once the output level has been adjusted, the level will be the same for all digital sound field programs.

 

Speakers

Control range (dB)

Preset value

 

 

 

 

 

 

 

CENTER

MIN, –20 to +10

0

 

 

RIGHT REAR

MIN, –20 to +10

0

 

 

LEFT REAR

MIN, –20 to +10

0

 

 

SUBWOOFER

MIN, –20 to 0

0

 

 

 

 

 

 

 

 

 

 

 

Memory back-up

The memory back-up circuit prevents the stored data from being lost when this unit is set in the standby mode. If, however, the power plug is disconnected from the AC outlet or the power is cut due to temporary power failure for more than one week, the values for the delay time and the center/rear/subwoofer output levels you set the last time will automatically return to the preset values. If so, they can be re-set by simply following the adjusting method on page 42.

43