■Connecting the speaker cable

1Remove approximately 10 mm (0.4 in) of insulation from the end of each speaker cable and then twist the exposed wires of the cable together to prevent short circuits.

10 mm (0.4 in)

CONNECTIONS

■Connecting the banana plug

The banana plug is a single-pole electrical connector widely used to terminate speaker cables.

Banana plug

1 Tighten the knob.

2 Loosen the knob.

PREPARATION

2 Insert the banana plug connector into the end of the corresponding terminal.

Red: positive (+)

Black: negative (–)

3 Insert one bare wire into the hole on the side of each terminal.

Red: positive (+)

Black: negative (–)

4Tighten the knob to secure the wire.

Red: positive (+)

Black: negative (–)

15