SET MENU

Crossover CROSS OVER

Use this feature to select a crossover frequency of all the speakers set to “SML” (or “SMALL”) or to “NONE” in “SPEAKER SET” (see pages 78 and 79). All frequencies below the selected frequency will be sent to the subwoofer or to the speakers set to “LRG” (or “LARGE”) in “SPEAKER SET” (see pages 78 and 79).

Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 160Hz, 200Hz

CROSS OVER

FREQ;;;80Hz

Subwoofer phase SUBWOOFER PHASE

Use this feature to switch the phase of your subwoofer if bass sounds are lacking or unclear.

Choices: NORMAL, REVERSE

02ASUBWOOFER PHASE

>NORMALREVERSE

•Select “NORMAL” if you do not want to reverse the phase of your subwoofer.

•Select “REVERSE” to reverse the phase of your subwoofer.

■Speaker level B)SPEAKER LEVEL

Use this feature to manually balance the speaker levels between the front left or surround left speakers and each speaker selected in “SPEAKER SET” (see page 78). Control range: –10.0 to +10.0 dB

Control step: 1.0 dB

Initial setting: 0 dB

B)SPEAKER LEVEL

-__________+

.FL;;;;;;;;;;

FR;;;;;;;;;;

 C;;;;;;;;;;

•Select “FL” to adjust the balance of the front left speaker.

•Select “FR” to adjust the balance of the front right speaker.

•Select “C” to adjust the balance of the center speaker.

•Select “SL” to adjust the balance of the surround left speaker.

•Select “SR” to adjust the balance of the surround right speaker.

•Select “SB” to adjust the balance of the surround back speaker.

•Select “SWFR” to adjust the balance of the subwoofer.

Note

“C”, “SL”, “SR”, “SB” and “SWFR” cannot be adjusted if “CENTER SP” (see page 79), “SUR. L/R SP” (see page 79), “SUR. B SP” (see page 79) and “LFE/BASS OUT” (see page 79) are set to “NONE” respectively.

80