PLAYBACK

5Rotate VOLUME on the front panel (or press VOLUME +/– on the remote control) to adjust the volume to the desired output level.

VOLUME

or VOLUME

Front panel

Remote control

6Press TONE CONTROL on the front panel repeatedly to select “TREBLE” or “BASS” and then press BASS/TREBLE +/– repeatedly to adjust the corresponding frequency response level.

TONE CONTROL

 

BASS/TREBLE

 

 

 

 

 

 

DVR V-AUX DTV/CBL pDVD MD/CD-R TUNER CD XM

 

VOLUME

SP

 

A

dB

TREBLE

0dB L R

•Select “TREBLE” to adjust the high-frequency response.

•Select “BASS” to adjust the low-frequency response.

Notes

•Speaker and headphone adjustments are stored independently.

•When “TONE BYPASS” is set to “AUTO” (see page 82), and “BASS” and “TREBLE” are set to 0 dB, audio output automatically bypasses the tone control circuitry of this unit.

•If you increase or decrease the high-frequency or low- frequency sound to an extreme level, the tonal quality of the surround speakers may not match that of the front left and right speakers.

•TONE CONTROL is not effective when the “DIRECT STEREO” mode (see page 38) is selected or when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 37).

•To enjoy multi-channel sources in surround, see page 41 for details.

7Press PROGRAM l/ hon the front panel (or press one of the sound field program selector buttons on the remote control) repeatedly to select the desired sound field program.

The name of the selected sound field program appears in the front panel display and in the OSD.

See page 64 for details about sound field programs.

l PROGRAM h

Front panel

or

STEREO

MUSIC

ENTERTAIN

MOVIE

1

2

3

4

STANDARD

SELECT

EXTD SUR.

DIRECT ST.

5

6

7

8

SPEAKERS

ENHANCER

NIGHT

STRAIGHT

9

0

10

ENT.

 

 

 

EFFECT

Remote control

DVR V-AUX

DTV/CBL pDVD MD/CD-R TUNER CD XM

 

VOLUME

SP

 

A

dB

TV Sports

L R

Currently selected

surround field program

Notes

•Choose a sound field program based on your listening preference, not merely on the name of the program.

•When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source.

•Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 37).

•Sampling frequencies higher than 48 kHz (except for DTS 96/24 signals) are sampled down to 48 kHz and then sound field programs are applied.

•To display information about the currently selected input source in the OSD, see page 39 for details.

32