1Set the component selector switch to AMP and then press ENHANCER on the remote control repeatedly to select the desired Compressed Music Enhancer mode.

The following display is shown in the OSD and the ENHANCER indicator lights up in the front panel display.

AMP

ENHANCER

USING AUDIO FEATURES

Selecting the MULTI CH INPUT component

Use this feature to select the component connected to the MULTI CH INPUT jacks (see page 23) as the input source.

Press MULTI CH INPUT on the front panel (or MULTI CH IN on the remote control) so that “MULTI CH INPUT” appears in the front panel

SOURCE

TV

0

display.

MUSIC ENHANCER

2ch

Stereo

ENHANCER

. LOW

>HIGH

 

Lights up

Choices: 2ch Stereo, 6ch Stereo, Off

•Select “2ch Stereo” to play back compression artifacts in 2-channel stereo.

•Select “6ch Stereo” to play back compression artifacts in 6.1-channel stereo.

•Select “Off ” to turn off the Compressed Music Enhancer mode.

Note

When you select “Off ”, this unit returns to the previously selected sound field program.

2Press j/ ion the remote control to select the desired effect level.

PRESET/CH

ENTER

A-E/CAT.A-E/CAT.

Choices: HIGH, LOW

•Select “HIGH” for a high effect level.

•Select “LOW” for a low effect level.

Note

Set the effect level to “HIGH” or “LOW” according to the characteristics of a source. The high-frequency signals of some sources may be emphasized too much. In this case, se the effect level to “LOW”.

MULTI CH

MULTI CH IN

INPUT

 

or

Front panel

Remote control

MULTI CH INPUT

Note

When “MULTI CH INPUT” is shown in the front panel display, no other source can be played. To select another input source with the INPUT selector on the front panel (or one of the input selector buttons), press MULTI CH INPUT (or MULTI CH IN on the remote control) so that “MULTI CH INPUT” disappears from the front panel display.

OPERATION

BASIC

 

 

37