8MEMORY (MAN’L/AUTO FM)

Stores a preset station in the memory. Hold down this button for more than 3 seconds to start automatic preset tuning (see page 47).

9TUNING MODE (AUTO/MAN’L)

Switches between automatic tuning (the AUTO indicator is turned on) and manual tuning (the AUTO indicator is turned off) (see page 45).

0VIDEO AUX jacks

Input audio and video signals from a portable external source such as a game console, a video camera or a portable audio player (see page 23).

y

To reproduce the source signals input at these jacks, select “V-AUX” as the input source.

Notes

•The audio signals input at the PORTABLE mini jack take priority over the ones input at the AUDIO L/R jacks.

•The audio signals input at the DOCK terminal on the rear panel take priority over the ones input at the VIDEO AUX jacks.

AVOLUME

Controls the output level of all audio channels.

y

This does not affect the AUDIO OUT (REC) level.

B PHONES (SILENT CINEMA) jack

Outputs audio signals for private listening with headphones (see page 33).

Notes

•When you connect headphones, no signals are output at the SUBWOOFER OUTPUT jack or the speaker terminals.

•All Dolby Digital and DTS audio signals are mixed down to the left and right headphone channels.

CSPEAKERS A/B

Turns on or off the set of front speakers connected to the FRONT A and/or B terminals on the rear panel each time the corresponding button is pressed.

DSTRAIGHT (EFFECT)

Turns the sound field programs off or on. When the “STRAIGHT” mode is selected, 2-channel or multi- channel input signals are output directly from their respective speakers without effect processing (see page 38).

ETONE CONTROL

Selects “BASS” or “TREBLE” to adjust the tonal balance of the front left and right speakers in conjunction with BASS/TREBLE +/– (see page 32).

CONTROLS AND FUNCTIONS

FBASS/TREBLE +/–

Adjusts the bass/treble balance of the front left and right speakers in conjunction with TONE CONTROL

(see page 32).

GPROGRAM l / h

Selects sound field programs (see page 32).

HINPUT MODE

Selects either digital or analog input signals exclusively or sets this unit to automatically detect the type of input signals and select the corresponding input signals when one component is connected via both digital and analog connections (see page 34).

IINPUT selector

Selects the desired input source.

JMULTI CH INPUT

Selects the component connected to the MULTI CH INPUT jacks as the input source (see page 37).

Note

The input source connected to the MULTI CH INPUT jacks takes priority over the source selected with the INPUT selector on the front panel (or the input selector buttons on the remote control).

INTRODUCTION

5