Components

When constant speed is desired, tighten the adjuster to maintain the desired throttle set- ting.

EMU25993

Engine shut-off cord (lanyard) and clip

The clip must be attached to the engine shutoff switch for the engine to run. The cord should be attached to a secure place on the operator’s clothing, or arm or leg. Should the operator fall overboard or leave the helm, the cord will pull out the clip, stopping ignition to the engine. This will prevent the boat from running away under power. WARNING! Attach the engine shut-off cord to a secure place on your clothing, or your arm or leg while operating. Do not attach the cord to clothing that could tear loose. Do not route the cord where it could become en- tangled, preventing it from functioning. Avoid accidentally pulling the cord during normal operation. Loss of engine power means the loss of most steering control. Also, without engine power, the boat could slow rapidly. This could cause people and objects in the boat to be thrown forward. [EWM00122]

1.Cord

2.Clip

3.Engine shut-off switch

1.Cord

2.Clip

3.Engine shut-off switch

EMU26001

Engine stop button

To open the ignition circuit and stop the en- gine, push this button.

23