Yamaha LIT-18626-07-93 WARNING, WARNING, Procedure for tilting up (power trim and tilt models)

Operation

duce salt corrosion.

EWM00221

WARNING

Be sure all people are clear of the outboard motor when tilting up and down, Body parts can be crushed between the motor and the clamp bracket when the motor is trimmed or tilted.

EWM00250

WARNING

Leaking fuel is a fire hazard. If there is a fuel joint on the outboard motor, disconnect the fuel line or close the fuel cock if the engine will be tilted for more than a few minutes. Otherwise fuel may leak.

ECM00241

NOTICE

●Before tilting the outboard motor, stop the engine by following the procedure on page 48. Never tilt the outboard mo- tor while the engine is running. Severe damage from overheating can result.

●Do not tilt up the engine by pushing the tiller handle (if equipped) because this could break the handle.

EMU32723

Procedure for tilting up (power trim and tilt models)

1.Place the remote control lever / gear shift lever in neutral.

N

2.Press the power trim and tilt switch “” (up) until the outboard motor has tilted up completely.

ZMU03196

52