Instruments and indicators

EMU31414

Digital tachometer

The tachometer shows the engine speed and has the following functions.

All segments of the display will light momentarily after the main switch is turned on and will return to normal thereafter.

the power trim and tilt switch.

●If the trim angle of your motor exceeds the trim operating range, the top segment on the trim meter display will blink.

1

3

2

ZMU01869

54

6

7

ZMU01891

1.Tachometer

2.Trim meter

3.Hour meter

4.Oil level indicator

5.Overheat-alert indicator

6.Set button

7.Mode button

TIP:

The water separator-alert indicator and engine trouble-alert indicator on the digital tachometer do not operate for this engine.

EMU36050

Tachometer

The tachometer displays engine speed in hundreds of revolutions per minute (r/min). For example, if the tachometer display reads “22” then the engine speed is 2200 r/min.

EMU26621

Trim meter

This meter shows the trim angle of your outboard motor.

●Memorize the trim angles that work best for your boat under different conditions. Adjust the trim angle to the desired using

EMU26651

Hour meter

This meter shows the number of hours the engine has been run. It can be set to show the total number of hours or the number of hours for the current trip. The display can also be turned on and off.

 

ZMU01870

To

change the display format, press the

“

” (mode) button. The display can show

total hours or trip hours, or turn off.

To reset the trip hours, simultaneously press

the “” (set) and “” (mode) buttons for more than 1 second while the trip hours are displayed. This resets the trip counter to 0 (zero).

The total number of hours the engine has been run cannot be reset.

28