MIDI Data Format
20
2.1.2.2 Identity Request
11110000 F0H = Exclusive status
01111110 7EH = Universal Non-Real Time
0mmmmmmm MMH = Device Number
00000110 06H = Sub-ID #1=General Information
00000001 01H = Sub-ID #2=Identity Request
11110111 F7H = End of Exclusive
When this message is received, this instrument will transmit the following 2.1.2.3 Iden-
tity Reply message.
2.1.2.3 Identity Reply
11110000 F0H = Exclusive status
01111110 7EH = Universal Non-Real Time
0mmmmmmm MMH = Device Number
00000110 06H = Sub-ID #1=General Information
00000010 02H = Sub-ID #2=Identity Reply
01000011 43H = YAMAHA ID
00000000 00H = Device Family Code LSB
MU90R ID #1
01000001 41H = Device Family Code MSB
MU90R ID #2
01010010 52H = Device Number Code LSB
MU90R ID #3
00000010 02H = Device Number Code MSB
MU90R ID #4
00000000 00H
00000000 00H
00000000 00H
00000001 01H = Tone Generator Code=XG
11110111 F7H = End of Exclusive
When this instrument receives a 2.1.2.2 Identity Request message, it will transmit this
message.
2.1.3 XG Parameter Change
This message sets XG-related parameters. One parameter can be modified by each mes-
sage. The message format is as follows.
11110000 F0H Exclusive status
01000011 43H YAMAHA ID
0001nnnn 1NH N:device Number
01001100 4CH Model ID
0ggggggg GGH Address High
0mmmmmmm MMH Address Mid
0lllllll LLH Address Low
0sssssss SSH Data
::
11110111 F7H End of Exclusive
For parameters with a data size of 2 or 4, the corresponding number of data bytes will be
transmitted.
2.1.3.1 XG System On
11110000 F0H Exclusive status
01000011 43H YAMAHA ID
0001nnnn 1NH N:device Number
01001100 4CH Model ID
00000000 00H Address High
00000000 00H Address Mid
01111110 7EH Address Low
00000000 00H Data
11110111 F7H End of Exclusive
When On is received, SOUND MODULE MODE will be set to XG.
Since approximately 50 ms is required to execute this message, an appropriate interval
must be left before the next message.
2.1.3.2 XG System parameter change
This message sets the XG SYSTEM block (see tables <1-1> and <1-2>).
2.1.3.3 Multi Effect1 parameter change
This message sets the MULTI EFFECT1 block (see tables <1-1> and <1-4>).
2.1.3.4 Multi EQ parameter change
This message sets the MULTI EQ block (see tables <1-1> and <1-5>).
2.1.3.5 Multi Effect2 parameter change
This message sets the MULTI EFFECT2 block (see tables <1-1> and <1-6>).
2.1.3.6 Display parameter change
This message sets the DISPLAY block (see tables <1-1> and <1-7>).
2.1.3.7 Multi Part parameter change
This message sets the MULTI PART block (see tables <1-1> and <1-8>).
2.1.3.8 AD Part parameter change
This message sets the AD PART block (see tables <1-1> and <1-9>).
2.1.3.9 AD Part parameter change
This message sets the AD SYSTEM block (see tables <1-1> and <1-10>).
2.1.3.10 Drums Setup parameter change
This message sets the DRUMS SETUP block (see tables <1-1> and <1-11>).
2.1.4 MU80 Native parameter changes
These messages set parameters unique to the MU80. One parameter can be modified by
each message. The message format is as follows.
11110000 F0H Exclusive status
01000011 43H YAMAHA ID
0001nnnn 1NH N:Device Number
01001001 49H Model ID
0ggggggg GGH Address High
0mmmmmmm MMH Address Mid
0lllllll LLH Address Low
0vvvvvvv VVH Data
::
11110111 F7H End of Exclusive
For parameters with a data size of 2 or 4, the corresponding number of data bytes will be
transmitted.
2.1.4.1 System parameter change
This message sets the SYSTEM block (see tables <2-1> and <2-2>).
2.1.4.2 Remote switch
This message sets the REMOTE SWITCH block (see tables <2-1> and <2-3>).
2.1.5 MU90/MU90R Native parameter changes
These messages set parameters unique to the MU90/MU90R. One parameter can be
modified by each message. The message format is as follows.
11110000 F0H Exclusive status
01000011 43H YAMAHA ID
0001nnnn 1NH N:Device Number
01011001 59H Model ID
0ggggggg GGH Address High
0mmmmmmm MMH Address Mid
0lllllll LLH Address Low
0vvvvvvv VVH Data
::
11110111 F7H End of Exclusive
For parameters with a data size of 2 or 4, the corresponding number of data bytes will be
transmitted.
2.1.5.1 Current Performance parameter change
This message sets the CURRENT PERFORMANCE block (see tables <3-1> and <3-
2>).
2.1.6 Other parameter changes
2.1.6.1 Master Tuning
This message simultaneously modifies the pitch of all channels.
11110000 F0H Exclusive status
01000011 43H YAMAHA ID
0001nnnn 1NH N:device Number
00100111 27H Model ID
00110000 30H Address High
00000000 00H Address Mid
00000000 00H Address Low
0mmmmmmm MMH Master Tune MSB
0lllllll LLH Master Tune LSB
0xxxxxxx XXH don’t care
11110111 F7H End of Exclusive
Normally the XG SYSTEM parameter MASTER TUNE should be used (see table <1-
2>).
2.2 Bulk Dump
This instrument uses the following bulk dumps.
[ XG BULK DUMP ]
1) XG System bulk dump
2) System Information bulk dump
3) Multi Effect1 bulk dump
4) Multi EQ bulk dump
5) Multi Effect2 bulk dump
6) Multi Part bulk dump
7) AD Part bulk dump
8) Drums Setup bulk dump
[ MU80 NATIVE BULK DUMP ]
1) System bulk dump
2) MU80, MU50 Internal Performance bulk dump
[ MU90,MU90R NATIVE BULK DUMP ]
1) Internal Performance bulk dump