Transposing in Dual and Split modes
Transposing is a little more complex in Dual and Split modes than it is in Single mode, because the P-100 allows you
to transpose the sub voice independently of the main voice. The default sub voice transpose amounts are set to 12 for
Dual mode, and 0 for Split mode.
The procedure for changing the sub voice transpose amounts is similar to that described for the main voice, except that
you must press and hold the [TRANSPOSE] and [SPLIT] buttons rather than just the [TRANSPOSE] button. Use the
operation below while the P-100 is in Dual mode to change the setting for the Dual mode sub voice, or in Split mode
to change the setting for the Split mode sub voice. You cannot change the sub voice settings while the P-100 is in
Single mode.
Press and hold first the [TRANSPOSE] button, then the [SPLIT]
button. Then adjust the transpose amount by pressing one of the
keys on the keyboard, or using the [-1] or [+1] buttons, as
described on the preceding page.
You can set the transpose amount for the sub voice anywhere
within a range of four octaves, from –24 (C1) to 24 (C5). As with
the main voice transpose amount, if you try to set the transpose
amount by pressing a key below C1 or above C5 on the keyboard,
the P-100 will react as though you pressed C1 or C5.
When you have set the sub voice transpose amount to the desired value, release the [TRANSPOSE] and [SPLIT]
buttons. The P-100 will display the new value for about a second, then show the number of the currently selected
voice. As with the main voice setting, the P-100 will assume that you want to transpose using this value, and leave the
transpose function turned on after you complete the setting.
Please note that the Dual mode sub voice setting will change automatically to match the main voice whenever you
change the main voice transpose setting while the P-100 is in Dual mode. This allows you to change the transpose
setting for both voices with a single operation.
Once you have set transpose amounts for both the main and sub voices, pressing the [TRANSPOSE] button will turn
the transpose function on and off for both voices in Dual or Split mode. It is not possible to turn the function off for
only one of the two voices in these modes.
23