Transmit and receive channels
This is actually a group of three settings. In addition to the MIDI transmit and receive channels described on page 25,
the P-100 lets you specify a separate channel to receive program change messages.
1.
Enter MIDI Utility mode.
Press the [CHANNEL] button while holding down the [MIDI]
button The current transmit channel setting will appear in the
display.
2.
Select a setting to change.
32
Press the [CHANNEL] button once or twice more to select the
setting you wish to change.
The transmit channel is indicated in the display by the letter “t”,
the receive channel by the letter “r”, and the program change
receive channel by the letter “p”. If you press the [CHANNEL]
button a fourth time, the display will cycle back to the transmit
channel setting.
3.
Set the desired value.
Use the [DATA ENTRY] slider or the [-1] and [+l] buttons to
select the desired value.