Local control
This setting allows you to disconnect the P-100’s keyboard from its internal tone generator. It is usually turned on so
that the P-100 will function normally, producing music in response to the notes you play on the keyboard. When you
turn the local control off, the internal tone generator will no longer respond to notes you play. However, the keyboard
will still transmit messages via the MIDI OUT terminal, and the tone generator will respond to messages received at
the MIDI IN terminal.
1. Enter MIDI Utility mode.
Press the [LOCAL] button while holding down the [MIDI]
button. The current local control setting will appear in the
display.
2.
Set the desired value.
Use the [DATA ENTRY] slider or the [-l] and [+1] buttons to
switch the setting on or off.
3.
Exit MIDI Utility mode.
Press the [MIDI] button to exit MIDI Utility mode.
34