MIDI merge
When the MIDI merge function is turned on, any MIDI data received at the MIDI IN terminal will be echoed through
the MIDI OUT terminal together with data transmitted by the P-100, allowing instruments receiving this data to be
controlled by both the P-100 and other devices connected to the P-100’s MIDI IN terminal.
1.
Enter MIDI Utility mode.
Press the [MERGE] button while holding down the [MIDI]
button. The current MIDI merge setting will appear in the
display.
2.
Set the desired value.
Use the [DATA ENTRY] slider or the [-l] and [+l] buttons to
switch the setting on or off.
3.
Exit MIDI Utility mode.
Press the [MIDI] button to exit MIDI Utility mode.
35