Recording Your Own Performance
You can also start recording by pressing the [>/■] button.
Press the [EXIT] button, and the measure number is shown in the Main display.
When recording is started, the display automatically returns to the Main display.
Current measure number
Start
recording
NOTE
•When Song memory is full, a corresponding message is shown in the display and record- ing will be stopped. In this case, delete any unnecessary Song data by using Song clear or track clear then start recording again. (See page 37.)
or
Alternately, if you press one of the ENDING/rit.
■To Record Other Tracks.
Repeat steps 2 through 4 to record any of the remaining tracks.
You can listen to the previously recorded tracks by pressing the appropriate [1]–
[8]buttons while recording. Previously recorded track numbers are shown in a box border.
You can also mute previously recorded tracks (the muted tracks will not appear in the display) while recording new tracks (page 66).
■Redo the Recording
Simply select the track you want to
5 After the recording is completed: ◆ Play the User Song
The operation is the same as that for Preset Songs (see page 27).
1 Press the [USER] button.
2 The current Song number/name will be
3Press the [>/■] button.
◆Save the User Song to USB flash Memory (see page 76)
◆Convert the Song data to SMF format and then save to USB flash Memory (see page 77)
NOTE
•Press the [REGIST/TRACK] button a number of times until the “TR
36