Yamaha PSR-S500 The Functions, Selecting and Setting Functions

		r
	e e
f			n
e				c
R				e

The Functions

The “Functions” provide a wide range of both detailed and overall instrument parame- ters, such as adjusting the tuning, setting the split point, and editing the voices and effects.

Selecting and Setting Functions

There are 49 function parameters in all.

1 Find the function you want to set in the list that begins on page 71.

2 Press the [FUNCTION] button.

4 Use the dial or the [+/YES] and [-/NO] buttons, to set the parameters.

The [+/YES] and [-/NO] buttons are used to make ON/ OFF type settings: [+/YES] = ON, [-/NO] = OFF.

In some cases, pressing the [+/YES] button will execute the selected function, and pressing [-/NO] will cancel the selection.

Press the [+/YES] and [-/NO] buttons simultaneously to recall the default setting (excepting the initial setup of MIDI).

3 Select a function. Press the CATEGORY [f ] and [r ] buttons as many times as necessary until the function’s display name appears in the display.

Take a look at the function list starting on page 71.

The name of the previous item in the list appears to the upper left, and the name of the next item in the list appears to the upper right of the currently selected item.

Press these simultaneously to recall the default setting.

• Increment value by 1.

• ON

• Execute

• Decrement value by 1.

• OFF

• Cancel

Function
group	Previous item	Next item

Current selected item Parameter

70 PSR-S500 Owner’s Manual