Connections
Connecting a Personal Computer
The following functions become available when this instrument is connected to a computer.
●Performance data can be transferred between the instrument and the computer (page 83).
●Files can be transferred between the instrument and the computer (page 85).
The connection procedure is as follows:
1 Install the
The
Installation of the USB MIDI driver is described on pages
2 Connect the USB terminal of the computer to the USB terminal on the instrument using a standard USB cable (USB cable sold separately).
The supplied
■USB Precautions
Please observe the following precautions when connecting the instrument to a computer via a USB cable.
Failure to do so can cause the instrument and/or the computer to hang up (freeze), possibly causing corruption or loss of data.
If the instrument or computer does hang up, turn the power to both devices off and then on again, and restart the computer.
CAUTION
•Wake the computer from a sleep/suspended/standby mode before connecting the USB cable.
•Connect the USB cable to the instrument and computer before turning power to the instrument on.
•Check the following points before turning the instrument’s power on or off, and before plugging or unplugging the USB cable.
•Quit all applications.
•Make sure that no data transfer is in progress. (Data is trans- ferred whenever you play the keyboard or play a song.)
•Allow at least 6 seconds between turning the instrument’s power on and off, and between plugging and unplugging the USB cable.
•Directly connect the instrument to the computer using a single USB cable. Do not use a USB hub.
Computer
USB TO HOST terminal
Instrument
NOTE
•The Musicsoft Downloader application may not be able to access the instrument in the following cases:
•During style playback.
•During song playback.
•During a file control operation (while the FILE CONTROL display is showing).
USB cable
82