Using Various Functions

Pitch Controls

Large Pitch Changes (Transpose)

The overall pitch of the instrument can be shifted up or down by a maximum of one octave in semitone increments.

1 Press one of the TRANSPOSE [+]/[-] buttons.

The value is shown in the display, indicating the amount of transposition over or below the normal value.

Current value

2 Use the dial to set the transpose value between -12 and +12 as required.

NOTE

• This setting does not affect Drum Kit Voices.

Press the [EXIT] button to return to the Main display.

Pressing the TRANSPOSE [+]/[-] buttons allows single-step changes. Pressing and holding either TRANSPOSE [+]/[-] button continuously increases or decreases the value.

Small Pitch Changes (Tuning)

The overall tuning of the instrument can be shifted up or down by a maximum of 1 semitone in approximately 0.2-Hz steps. The default setting is 440 Hz.

1 Press the [FUNCTION] button.

2 Press the CATEGORY [f ] and [r ] buttons as many times as necessary to call up Tuning.

Tuning

The range is 415.3–466.2 Hz

3 Use the dial to set the tuning value between 415.3–466.2Hz as required.

NOTE

• This setting does not affect Drum Kit Voices.

PSR-S500 Owner’s Manual 53