Bank ‘File’ containing the current 8 Registrations that are stored to the 8
‘REGISTRATION MEMORY’ buttons.
9) Use the [1] - [8] toggle buttons under the screen to name the Registration
Bank ‘File’.
10) Press the [8 ^] 'OK' button to save the Registration Bank ‘File’ into the
chosen memory location.
11) To name the 8 individual Registrations contained in the Registration Bank
‘File’, do the following:
a) Press the [8 ^] 'EDIT' button.
b) Press the [1 v] 'NAME' button.
c) Use the [A] - [D] and [F] - [I] buttons to select the desired Registration.
d) Press the [7 v] 'OK' button.
e) Use the [1] - [8] toggle buttons under the screen to name the
Registration.
f) Press the [8 ^] 'OK' button to store the name.
g) Press the [8 v] button to return to the 'REGISTRATION BANK' screen.
h) Press the [EXIT] button repeatedly to return to the 'MAIN' screen.
Loading Registrations:
NOTE: The ‘REGISTRATION MEMORY’ button settings are cleared whenever
the unit is turned OFF. To load Registrations back in after the unit has been
turned ON (or to select a different Registration Bank), the following procedure
must be performed.
1) Press the [J] 'REGISTRATION BANK' button.
2) Use the [BACK] and [NEXT] buttons to select a memory location ('USER'
or 'FLOPPY DISK') containing the desired Registration Bank ‘File’.
3) Select the desired Registration Bank ‘File’:
a) If Folders were first created, use the [A] - [J] buttons to select the
desired Folder, then the desired Registration Bank ‘File’.
b) If Folders were not created, use the [A] - [J] buttons to directly select