or [F] - [I] buttons twice; the chosen Part may then be selected from any of the existing Styles, using the [A] - [J] buttons.
EXAMPLE: The RHYTHM2 Part from the Style, '60'sGtrPop' may be used for the RHYTHM2 Part in the New Style.
3)Press the [EXIT] button to return to the 'ASSEMBLY' page.
4)Repeat steps 2 - 3 for the remaining 7 Parts of the Style, if desired.
5)Press the [BACK] button to return to the 'BASIC' page.
Recording an original Part onto a Channel from scratch:
1)Press the [F] 'REC CH' button to display the 8 Record Channels in the screen.
2)Select a Channel for recording by simultaneously holding the [F] 'REC CH' button, while pressing one of the 8 [v] toggle buttons below the screen.
EXAMPLE: The 'RHY2' Channel will display 'REC' in the screen, when selected.
3)Select a Voice or Drum Kit for the Channel by first pressing the [^] toggle button below it, and then using the [A] - [J] and toggle buttons to make a selection.
4)Press the [EXIT] button to return to the 'BASIC' screen.
5)Press the black [START/STOP] button in the 'STYLE' section of the front panel. Recording begins and the Metronome click is heard.
6)Play the desired Part on the keyboard.
7)If a mistake is made while recording a Rhythm Part, hold the [E] 'RHY CLEAR' button and touch the note corresponding to the Drum Voice which was played incorrectly; the entire phrase recorded with that Drum Voice will be cleared.
8)When finished, press the black [START/STOP] button again.
9)Repeat steps 2 - 8 to record other Channels.
10)When finished recording all Channels, press the [EXIT] button once to return to the original 'BASIC' screen view.
