■Speaker distance SP DISTANCE

Use this feature to manually input the distance of each speaker and adjust the delay applied to respective channel. Ideally, each speaker should be the same distance from the main listening position. However, this is not possible in most home situations. Thus, a certain amount of delay must be applied to the sound from each speaker so that all sound will arrive at the listening position at the same time. To access these parameters, select:

MANUAL SETUP > SOUND MENU > SP DISTANCE >

C)SP DISTANCE

. UNIT;;;;;;meters

FRONTL;;;;2.30m

FRONTR;;;;2.30m

CENTER;;;;;2.00m

p/p

:

Up/Down

-/+

:

Adjust

Unit UNIT

Choices: meters (m), feet (ft)

Initial setting:

U.S.A. and Canada models: feet (ft)

Other models: meters (m)

•Select meters to input speaker distances in meters.

•Select feet to input speaker distances in feet.

Speaker distances

Choices: 0.3 to 24.00 m (1 to 80 ft)

•FRONT L adjusts the distance of the front left speaker. Initial setting: 3.0 m (10.0 ft)

•FRONT R adjusts the distance of the front right speaker. Initial setting: 3.0 m (10.0 ft)

•CENTER adjusts the distance of the center speaker. Initial setting: 3.0 m (10.0 ft)

•SURR L adjusts the distance of the surround left speaker. Initial setting: 3.0 m (10.0 ft)

•SURR R adjusts the distance of the surround right speaker. Initial setting: 3.0 m (10.0 ft)

•SB adjusts the distance of the surround back left speakers. Initial setting: 2.10 m (7.0 ft)

•SWFR adjusts the distance of the subwoofer. Initial

setting: 3.0 m (10.0 ft)

SET MENU

■Graphic equalizer GRAPHIC EQ

Use this feature to select parametric (PEQ) or graphic equalizer (GEQ).

To access these parameters, select:

MANUAL SETUP > SOUND MENU > GRAPHIC EQ >

Equalizer select EQ SELECT

Choices: PEQ, GEQ

•Select PEQ to use the equalizer adjusted in auto setup.

•Select GEQ to adjust the built-in 7-band graphic equalizer so that the center, surround L/R and surround back L/R speakers tonal quality matches that of the left and right front speakers.

D)GRAPHIC EQ

. CHANNEL;;FRONT L

-

+

63Hz

0dB

160Hz

0dB

400Hz

0dB

1kHz

0dB

2.5kHz

0dB

6.3kHz

0dB

16kHz

0dB

Choices: –6 to +6 (dB)

You can adjust 7 frequency bands: 63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.3kHz, 16kHz

■Low-frequency effect level LFE LEVEL

Use to adjust the output level of the LFE (low-frequency effect) channel according to the capacity of your subwoofer or headphones. The LFE channel carries low- frequency special effects which are only added to certain scenes. This setting is effective only when this unit decodes Dolby Digital or DTS signals.

To access these parameters, select:

MANUAL SETUP > SOUND MENU > LFE LEVEL

E)LFE LEVEL

. SPEAKER;;;;;;0dB

HEADPHONE;;;;0dB

p/p : Up/Down

-/+ : Adjust

Choices: –20 to 0 (dB)

Speaker SPEAKER

Select to adjust the speaker LFE level.

Headphone HEADPHONE

Select to adjust the headphone LFE level.

Note

Depending on the settings of LFE LEVEL, some signals may not be output from the SUBWOOFER jack.

OPERATION

ADVANCED

 

 

English

51