SET MENU

Manual setup: OPTION

4 OPTION MENU

. A)DISPLAYSET B)MEMORYGUARD C)PARAM.INI D)ZONESET

p/p

:

Up/Down

-/+

:

Select

■ Display set DISPLAY SET

MANUAL SETUP > OPTION MENU >

DISPLAY SET >

A)DISPLAY SET

. DIMMER;;;;;;;;;0 OSD SHIFT;;;;;;0 GRAY BACK;;;AUTO

VCONV.;;;;;;;ON CMPNT OSD;;;;OFF

p/p : Up/Down

-/+ : Select

Dimmer DIMMER

Use to adjust the brightness of the front panel display. Choices: –4 to 0

OSD shift OSD SHIFT

Use to adjust the vertical position of the OSD. Choices: +5 (downward) to –5 (upward)

•Press + to lower the position of the OSD.

•Press – to raise the position of the OSD.

Gray back GRAY BACK

Selecting AUTO for the on-screen display setting displays a gray background when there’s no video signal input. Nothing is displayed if OFF is selected.

Choices: AUTO, OFF

Note

If “GRAY BACK” is set to OFF, no information will be displayed on the screen when video signals are not being input.

Video conversion V CONV.

Use this feature to turn on/off the conversion of composite signals to both S-video and component signals. This allows you to output composite signals from the S-video jack or the component video jack when no S-video or component signals are input. This feature also converts S- video signals to component signals when no component signals are input.

Choices: ON, OFF

•Select OFF not to convert any signals.

•Select ON to convert composite signals to S-video and component signals, and to convert S-video signals to component signals.

Notes

•Converted video signals are only output to the MONITOR OUT jacks. When recording you must make the same type of video connections (composite or S-video) between each component.

•When converting S-video signals from a VCR to component video signals, the picture quality may suffer depending on your VCR.

Component OSD CMPNT OSD

Use this feature to turn on/off the OSD when you are using COMPONENT VIDEO MONITOR OUT jacks while using the set menu.

Choices: ON, OFF

•Select ON to output the OSD signals from COMPONENT VIDEO MONITOR OUT jacks while using the set menu.

•Select OFF if you do not want to output the OSD signals from COMPONENT VIDEO MONITOR OUT jacks while the using set menu.

Note

Set menu functions even when OFF is selected.

■Memory guard MEMORY GUARD

Use this feature to prevent accidental changes to DSP program parameter values and other system settings.

MANUAL SETUP > OPTION MENU >

MEMORY GUARD >

B)MEMORY GUARD

[OFF ON

p/p : Exit

-/+ : Select

Choices: ON, OFF

Select ON to protect:

•DSP program parameters

•All SET MENU items

•All speaker levels

•The on-screen display (OSD) mode

When MEMORY GUARD is set to ON, you cannot use the test tone or select any other SET MENU items.

56