ZONE 2/ZONE 3
(U.S.A., CANADA AND AUSTRALIA MODELS ONLY)
This unit allows you to configure a
Only analog signals are sent to the second and third rooms. Any source you want to listen to in the second or third room must be connected using the analog (AUDIO L/R) input jacks on this unit.
Zone 2/Zone 3 connections
You need the following additional equipment to use the
•An infrared signal receiver in the second and/or third room.
•An infrared emitter in the main room. This emitter transmits the infrared signals from the remote control in the second and/or third room to the main room (to a CD player or LD player, for example).
•An amplifier and speakers for the second and/or third room.
•A video monitor for the second room.
OUT | IN | OUT | IN |
| REMOTE | |||||
CONTROL OUT | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This unit
y
•Since there are many possible ways to connect and use this unit in a
•Some YAMAHA models are able to connect directly to the REMOTE CONTROL OUT jack of this unit. If you own these products, you may not need to use an infrared emitter. Up to 6 YAMAHA components can be connected as shown.
■System configuration and connections example
Using external amplifiers
To use an external amplifier in Zone 2, select OFF in ZONE2 AMP.
|
| ZONE 2 VIDEO OUT |
|
|
| ZONE 2 AUDIO OUT | ZONE 3 AUDIO OUT |
|
| Amplifier Video | Amplifier |
|
| monitor |
|
DVD player |
|
|
|
(or other component) | This unit | Remote control | Remote control |
DVD INPUT |
|
|
|
|
| Infrared signal | Infrared signal |
|
| receiver | receiver |
Infrared emitter |
|
| |
Main room |
| Second room | Third room |
REMOTE CONTROL OUT | ZONE 2 REMOTE IN | ZONE 3 REMOTE IN | |
Notes
•When not using the main room, turn down the volume of this unit in the main room. Adjust the Zone 2/Zone 3 volume by using the amplifier in the second/third room.
•To avoid unexpected noise, DO NOT USE the Zone 2/Zone 3 feature with CDs encoded in DTS.
72