■Parameter initialization PARAM. INI
Use this feature to initialize the parameters for each sound field program within a sound field program group. When you initialize a sound field program group, all of the parameter values within that group revert to their initial settings.
MANUAL SETUP > OPTION MENU >
PARAM. INI >
Press the corresponding numeric button for the sound field program that you want to initialize.
An asterisk (*) next to a program number means that the parameter values have been changed from their initial settings.
C)PARAM. INI
1 2 3 *4
*5 6 7 8
9 *10 11
Notes
•You cannot automatically revert to the previous parameter settings once you initialize a sound field program group.
•You cannot separately initialize individual sound field programs.
•You cannot initialize any program groups when MEMORY GUARD is set to ON.
■Speaker impedance setting SP IMP.SET
Use to select the impedance of your speakers.
MANUAL SETUP > OPTION MENU > SP IMP.SET >
D)SP IMP.SET
Minimum 8ohms
p/p : Exit
Choices: 6ohms, 8ohms
■Zone set ZONE SET
Use to specify the location of speakers connected the SPEAKERS B terminals.
MANUAL SETUP > OPTION MENU >
ZONE SET >
E)ZONE SET
SP_B;;;;;;FRONT
p/p : Exit
SET MENU
SP B
Use this feature to select the location of the front speakers connected to the SPEAKERS B terminals.
Choices: FRONT, ZONE B
•Select FRONT to turn on/off SPEAKERS A and B when the speakers connected to the SPEAKERS B terminals are set in the main room.
•Select ZONE B if the speakers connected to the SPEAKERS B terminals are set in another room. If SPEAKERS A is turned OFF and SPEAKERS B is turned ON, all the speakers including the subwoofer in the main room are muted and the unit outputs sound from SPEAKERS B only.
Notes
•If you connect headphones to the PHONES jack on the unit, the sound is output from both headphones and SPEAKERS B.
•When a DSP program is selected, the unit automatically enters the Virtual Cinema DSP mode.
■Zone 2 set ZONE2 SET
(U.S.A., Canada and Australia models only)
MANUAL SETUP > OPTION MENU >
ZONE2 SET >
F)ZONE2 SET
OUTPUT VOL;;VAR.
ZONE2 AMP;;;NONE
p/p : Up/Down
Output volume OUTPUT VOL
Use to select how the volume control will operate with regard to the ZONE 2 OUTPUT jacks.
Choices: VAR., FIX
•Select VAR. to adjust the ZONE 2 OUTPUT volume simultaneously with VOL +/– on the remote control.
•Select FIX to fix the ZONE 2 OUTPUT volume level to a standard line level.
Zone 2 amplifier ZONE2 AMP
Use to select how the ZONE 2 speakers will be amplified. Choices: ON, OFF.
•Select OFF if you do not use Zone 2 speakers or if you connect your Zone 2 speakers through an external amplifiers connected to this unit’s ZONE 2 OUTPUT jacks.
•Select ON to use this unit’s internal amplifier if you connect your Zone 2 speakers directly to this unit’s
PRESENCE/ZONE 2 speaker terminals.
OPERATION | ADVANCED |
|
|
English
57