Yamaha RX-V520RDS ■Subwoofer connection

CONNECTIONS

Main speakers A Main speakers B

Right Left Right Left

(Europe model)

	+	–	SPEAKERS	+
R			–		L

A

MAIN

B

MAINS

		IMPEDANCE SELECTOR				AC OUTLETS
		SET BEFORE POWER ON				SWITCHED
						100W MAX. TOTAL
CENTER	REAR	MAIN A OR B: 8			MIN. /SPEAKER
				A + B:16 MIN. /SPEAKER
R	(SURROUND) L	CENTER		: 8	MIN. /SPEAKER
		REAR		: 8	MIN. /SPEAKER
+	MAIN A OR B: 4		MIN. /SPEAKER
		A + B: 8 MIN. /SPEAKER
	CENTER	: 6	MIN. /SPEAKER
	REAR	: 6	MIN. /SPEAKER

–

SUB

WOOFER

OUTPUT

	Right	Left
Subwoofer	Center speaker	Rear speakers
system

■Subwoofer connection

When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System, connect the input jack of the subwoofer system to this jack. Low bass signals distributed from the main, center and/or rear channels are directed to this jack. (The cut-off frequency of this jack is 90 Hz.) The LFE (low-frequency effect) signals generated when Dolby Digital or DTS is decoded are also directed if they are assigned to this jack.

Notes

•Adjust the subwoofer volume according to the operation instructions for the subwoofer. (Fine adjustment is possible using this unit’s output level control of the effect speakers.)

•Depending on the settings of “1 SPEAKER SET”, “LFE LEVEL (5 DOLBY D. SET)” and “6 DTS SET” in the SET MENU, some signals may not be output from the SUBWOOFER jack.

PREPARATION

English

17