RECEIVING RDS STATIONS

Radio Data System (RDS) is a data transmission system by FM stations in many countries. Stations using this system transmit an inaudible stream of data in addition to the normal radio signal.

RDS data contains various information such as PI (Program Identification), PS (Program Service name), PTY (Program Type), RT (Radio Text), CT (Clock Time), EON (Enhanced Other Networks), etc. The RDS function is carried out among the network stations.

Description of RDS Data

This unit can receive PI, PS, PTY, RT, CT, and EON data when receiving RDS broadcasting stations.

PS (Program Service name) mode:

The name of the RDS station being received is displayed.

PTY (Program Type) mode:

The program type on the RDS station being received is displayed. There are 15 program types to classify RDS stations. You can make this unit search for a station which is broadcasting a program of the desired type. Refer to “PTY SEEK Function” for details.

RT (Radio Text) mode:

Information about the program (such as the title of the song, name of the singer, etc.) on the RDS station being received is displayed by a maximum of 64 alphanumeric characters, including the umlaut symbol. If other characters are used for RT data, they are displayed with under-bars.

CT (Clock Time) mode:

The current time is displayed and updated every minute. If the data are accidentally cut off, “CT WAIT” may appear.

EON (Enhanced Other Networks):

Refer to “EON Function” on page 33.

Changing the RDS Mode

The four modes are available in this unit for displaying RDS data. When an RDS station is being received, PS, PTY, RT and/or CT that correspond to the RDS data services offered by the station light up on the display. Press RDS MODE/ FREQ repeatedly to change the display mode among the RDS data offered by the transmitting station in the order shown below. Illumination of the red indicator next to the RDS mode indicator shows that the corresponding RDS mode is now selected.

Notes

• When an RDS station is being received, do not press RDS

 

MODE/FREQ until one or more RDS mode indicators light up on

 

the display. If you press the button before the indicators light up

 

on the display, the mode cannot be changed. This is because the

 

unit has not yet received all of the RDS data on the station.

 

• RDS data not offered by the station cannot be selected.

 

• The RDS data service cannot be utilized by this unit if the

 

received signal is not strong enough. In particular, the RT mode

BASIC

requires a large amount of data to be received, so it is possible

 

that the RT mode may not be displayed even if other RDS modes

 

(PS, PTY, etc.) are displayed.

OPERATION

• RDS data cannot sometimes be received under poor reception

 

conditions. If so, press TUNING MODE so that the “AUTO”

 

indicator goes off from the display. Although the reception mode

 

is changed to monaural by this operation, when you change the

 

display to RDS mode, RDS data may be displayed.

 

• If the signal strength is weakened by external interference during

 

the reception of an RDS station, the RDS data service may be cut

 

off suddenly and “...WAIT” will appear on the display.

 

RDS MODE/FREQ

 

PS mode

 

 

 

 

 

PTY mode

 

 

RT mode

 

 

CT mode

 

 

Frequency

 

 

display mode

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

English

 

 

 

 

 

31